2. When this machine blows water bottle and beverage bottles, can be equiped with auto-loading preform system, auto-sorting preform system to save manpower; if the machine blows high-end bottles such as cosmetics bottles,because higher requirement for surface beauty, it does not allow scratching, so can only loading manually.

3. Output: water bottle as exanple,capacity less than 800ML round bottle, production capacity is 2000-2200BPH; to cosmetic bottles, capacity less than 800ML round bottle, production capacity is 1600-1800BPH.

Composition	Items	Technical Parameters
Product Conditions	Max Container Volume	800
	Max Container Diameter	Φ70mm
	Max Preform Neck Diameter	Φ12mm ~ Φ38mm
	Max Container Height	<240mm
	Max Preform Height	<115mm
	Mold Clamping Stroke	88 mm
	Bottom Mold Stroke	22mm
	Container Distance	101.6mm
	Standard Mold Thickness	180mm
	Theoretical Output（pcs/h）	2000-2400
	cavity	2
Heating Section	Heating unit	3
Heating Section	Heating lamp layers	8
	Preform Holders	46
Electrical Parameters	Voltage	220/380V
	Frequency	50/60Hz
	Actual Power	12~18kw/h
	Installation Power	41kw
Gas Source (High pressure air consumption depends on PET bottle volume)	Low pressure compressed air	8~10bar
	Low pressure compressed air consumption	1.0~1.5m3/min
	High pressure compressed air	26~35bar
	High pressure compressed air consumption	2.0m3/min
Cooling Water (water temperature≤18℃)	Pressure	3~4bar
Cooling Water (water temperature≤18℃)	Flow rate	3m3/h
Weight	Main Machine\Heater\Electric Cabinet	1.5T
Machine Size (mm)	Main Machine(L×W×H)	2175mmx1662mmx1916mm

无

DX1000-II