Copyright Shenzhen Dexing Machanical Co., Ltd.
Mobile Version
产品中心
/ PRODUCTS
DX04CC
Features:
1. Low power consumption, high productivity, stable performance, and high cost performance.
2. Production: 550ml, 16G round bottles, 2.9 seconds a cycle, that is, the standard production capacity of 3600BPH; to 1.5L, 28G round bottle calculation, a period of 3.5 seconds, the standard production capacity of 3000BPH. The speed of production is related to the weight, shape and thickness of the bottle type.
3.Using servo clamping and servo stretching, together with the double crank arm mechanical clamping system, the performance is more accurate, stable, and the efficiency is higher. The energy-saving and air-saving effect is better—basically, the cost of the low-pressure air compressor is basically not needed, and it is utilized. High-pressure gas recovery system, high pressure and more gas.
Product Details:
1. Embryo system: Servo single-channel embryos are used.
2. Revolution system: The use of a special chain, driven by a servo motor, makes the heating unit stable in motion, positioning fast and accurate.
3. Warming system: domestic unique semi-enclosed heating box with variable air-cooled, circulating water-cooled dual protection system, the use of infrared light tube (lamp arrangement according to the shape of the wide mouth preform pipe to tilt type) through the preform The heating makes the stretching more uniform and the transparency is higher; the matte reflective plate is provided, the reflection is soft and uniform, the heat energy of the lamp tube is fully utilized, the heating time is shortened, the energy consumption is reduced, and the production capacity is increased. Each lamp in each layer can be individually adjusted in temperature, and can be adjusted up or down according to the customer's different tube embryos.
4. Mold system: Using high-pressure mold clamping technology, no expansion mode phenomenon, and the mold line is fine. The mold adopts a drawer type structure and is fixed on the back plate of the mold by four fixed rods, which can be easily replaced within half an hour.